Intercom Features - Motorola APX 7500 O5 User Manual

Note: Only two (2) control heads are supported in the one
active mode.
Transceiver
ZONE CHAN
Follow the procedure below to toggle between the two control
heads.
Procedure:
Press the Menu Select button directly below F/R.
OR
Press the Menu Select button preprogrammed user button on
the keypad microphone.
Z1
SQL
PWR
Active Radio
REMOTE
F/R
Non-Active Radio

Intercom Features

The intercom feature allows a user at one control head to talk to
the user at the other control heads of a Multiple Control Head
configuration. At any given time, when a control head being
operated has priority for the intercom call, all other control
heads are blocked until the active control head releases PTT
button.
This can be made on any attached control head. This feature
only applies to control heads in the All Active mode.
Procedure:
1
Press the Menu Select button directly below INTC to
activate the intercom feature.
2
Press the PTT button on the microphone of one of the
control heads to initiate the audio transmission.
3
All control heads that are attached, receive the same
intercom call. The display of the receiving control heads
shows the alias/ID number of the transmitting control head.
Press the Menu Select button directly below
the intercom feature.
OR
H
Press on any control head to deactivate the intercom
feature.
The intercom feature also deactivates when user initiates a
mode change. If the radio is on an emergency channel,
EXIT
to deactivate
39
English