Sending A Quick Text Message - Motorola APX 7500 O5 User Manual

OR
Press the PTT button to send the message.
10
The display shows the SEND MESSAGE screen and
SENDING MSG.
11
If the message is sent, a tone sounds and the display shows
MSG SENT.
OR
If the message is not sent, a low tone sounds and the
display shows SEND FAILED.
If the message fails to send, the radio returns you to the main
TMS screen.
Note: You can append a priority status and/or a request reply
to your message. See Using the Priority Status and
Request Reply Features on page 61 for more
information.
You can also select the SAVE TO DRAFTS option to
save your message in the Drafts folder to send it at a
later time. See Accessing the Drafts Folder on
page 65 for more details.

Sending a Quick Text Message

Quick Text messages are messages that are predefined and
usually consist of messages that are used most frequently.
Each Quick Text message has a maximum length of 50
characters.
Procedure:
Press the preprogrammed Quick Text button and proceed to
Step 3.
OR
Follow the procedure below.
> <
1
or to TMS.
2
Press the Menu Select button directly below TMS to access
the TMS feature screen.
> <
3
or to COMPOSE and press the Menu Select button
directly below SEL.
OR
Press the Menu Select button directly below EXIT to return
to the TMS feature screen.
> <
4
or to QUICK TEXT and press the Menu Select button
directly below SEL for a predefined message.
> <
5
or to scroll through the list of messages and press the
Menu Select button directly below SEL to select the required
message.
59
English