Scanning Part Of A Document - Epson PERFECTION 1640 SU Reference Manual

5. Press the Scanner button in the Main window and click the
Go button to begin the process.
6. Choose appropriate settings and then click Continue to open
EPSON TWAIN.
Note:
For detailed settings, refer to your application's documentation.
7. In the Manual mode window, make sure that Auto
Document Feeder is selected from the Document Source
list. Also choose appropriate settings for the scanning.
8. Click Scan.
Note:
❏ When the Automatic Preview check box is selected in the
Configuration dialog box, EPSON TWAIN automatically starts the
preview.
❏ For further editing, refer to your application's documentation.

Scanning part of a document

To scan only part of an image, follow the steps below.
For Windows users
1. Load the first page of a document in the Automatic Document
Feeder as described in "Loading Paper into Your Automatic
Document Feeder" on page 5-19.
Note:
Only set one page of the document at this time. If you set multiple
pages at this time, the second page will be fed right after the first
page is scanned and may become stuck in the middle of the document
path as if the paper was jammed. In this case, you have to remove
the second page from the document path and load it again.
5-25
Options