Nintendo Wii RVL-AUS-S Operation Manual page 28

W i i S e t t i n g s a n d D a t a M a n a g e m e n t
Sensor Bar
When positioning the Sensor Bar, you may need to adjust two key settings. Select
Sensor Bar Position or Sensitivity, then proceed with the following instructions.
Sensor Bar Position
You'll want to adjust this setting to match where you've placed your Wii's Sensor Bar:
above or below your TV screen. Confirm your selection once it's complete.
52
Sensitivity
Use this feature to adjust the sensitivity of the Pointer function of the Wii Remote.
If you find that you're not getting an optimal pointing experience with the Wii
Remote, you may want to adjust this setting.
After you select Sensitivity from the Sensor Bar settings screen, you'll see an
explanation screen that further details the Sensitivity setting. Select OK to begin the
adjustment test.
In the test, you'll use the Wii Remote
Pointer to move a cursor into view within
the test field. If you see two blinking dots,
your current Sensitivity setting is working
fine. If you don't see two blinking dots,
adjust the Sensitivity with the + and -
Buttons until you do, then press the A
Button to confirm your new setting.
• If you see three or more dots, the Wii Remote may be sensing an extra light source.
See Wii Remote troubleshooting, page 31, in the Wii Operations Manual - System
Setup.
NOTE: The initial recommended distance for using the Wii Remote Pointer is 1 and 3
metres (3 to 10 feet) from the Sensor Bar. By increasing the Sensitivity setting, you'll
increase the distance at which you can use the Pointer. Also note that the influence of
direct sunlight and various light sources can make the Pointer operation less optimal.
Internet
You'll want to set up your Wii's Internet settings to work well with your home's
Internet connection, whether you have a wireless broadband network or want to
connect directly to your wired LAN network.
NOTE: When you connect the Wii to the Internet, the console's internal files will
sometimes be automatically updated.
When you select Internet from the Wii Settings screen, you'll go straight to the
Internet Setup screen. Before you proceed with setup selections, consult the
following flowchart to determine what settings and equipment would work well
with your home Internet environment.
Do you have a
Is your network
YES
high-speed
environment WIRED?
(broadband) Internet
connection, such as
Is your network
cable or DSL?
environment WIRELESS?
NO NO
You can't yet connect
Do you have a PC running
your Wii to the
Windows® XP or Windows
Internet. Find out
Vista® directly connected to
what you need to get
your high-speed Internet
NO
started.
connection?
pp 54-55
If you don't have a wireless network but instead
have a wired local-area network, you can connect
Wii to the network with a Wii LAN Adapter. [Sold
separately, may be ordered from Nintendo
Australia by calling Nintendo Customer Service on
(03) 9730 9822 between 9:00am and 5:00pm
Monday to Friday (EST)].
YES
You must use Internet Setup to
search for your wireless access point.
YES
AOSS access point - p. 60
YES
You can easily connect your Wii if you
get the separately sold Nintendo
Wi-Fi USB Connector and use Internet
Setup to connect with it.
p. 61
p. 58
p. 56
53