Delete A Redial Number; Delete The Entire Redial List; Find The Handset (Paging); Power Fail Back-Up - VTech FS6414-A User Manual

4.12.3 Delete a Redial Number

1. Follow Steps 1 and 2 in the section of Redial a Number from the Redial List.
2. Press OK then
3. Press OK. The display shows "CONFIRM?".
4. Press OK

4.12.4 Delete the Entire Redial List

1. Follow Steps 1 and 2 in the section of Redial a number from the Redial List.
2. Press OK then
3. Press OK The display shows "CONFIRM?".
4. Press OK
4.13

Find the Handset (PAGING)

1. Press /HANDSET LOCATOR on the base. All the registered and available
handsets will produce the paging tone and display "PAGING".
2. Press ,
on the base to stop paging.
NOTE
If there is an incoming call during paging, the phone will ring with the incoming call
instead of paging.
4.14

Power Fail Back-Up

Power Fail back-up system lets you make calls during a mains power interruption with
your cordless phone. During a mains power interruption you can supply the power
stored in your handset battery to the base unit, so you can make calls even when the
power is out.

4.14.1 To Set Power Fail Back-Up Mode

1. Press OK and
2. Press OK and
3. Press OK and
4. Press OK
to select DELETE.
to select DELETE ALL.
or DELETE on any handset or press /HANDSET LOCATOR again
to select HS SETTINGS.
to select POWER OUTAGE.
to select MANUAL, AUTO or OFF.
17