Programmable Sensor Keys - Siemens OpenStage 60 T Operating Instructions Manual

Programmable sensor keys

Your OpenStage 60/80 T has eight illuminated sensor keys to which you
can assign functions or numbers.
Increase the number of programmable sensor keys by connecting a
key module
Depending on how they are programmed, you can use the sensor keys as:
• Function keys
• Repdial keys
• Direct station selection keys
Only for repdial keys can you also program the second level for di-
rect destination selection.
Touch the key to activate the programmed function or dial the stored num-
ber.
Press and hold the function key to open a menu for programming it. Rep-
dial keys and direct station selection keys can only be programmed via the
Program/Service menu.
Your telephone can be configured so that direct station selection
keys cannot be set up, thus facilitating data and personal security.
Contact your service personnel should you have questions.
A label for the function is displayed to the left of the key; it cannot be
changed. You can define the labeling for repdial or DSS keys according to
your requirements
The status of a function is shown by the LED on the corresponding sensor
key.
Meaning of LED displays on function keys
LED
S
Off
T
[1]
Flashing
R
On
[1] In this manual, flashing sensor keys are identified by this icon, regardless of the flashing
interval. The flashing interval represents different statuses, which are described in detail in
the corresponding sections of the manual.
The programmable sensor keys on multi-line phones function as
line keys
page 15.
page 83
page 84
page 87
page 89.
Meaning of function key
The function is deactivated.
The function is in use.
The function is activated.
page 111.
Getting to know your OpenStage phone
19