Receiving A Status Message; Sending A Status Message - Motorola i325 User Manual

Advanced Features
• Dialing
1 Press A under Alert. You'll see Ready to Alert
on the display.
2 Press A under Select to select Status
Messages. You'll see a list of messages left on
your SIM.
3 Press A under Select to select the desired
Message.

Sending a Status Message

Once you're in the Ready to Alert screen, press
the PTT button to send a message.
After selecting both a Status Message and a
desired target ID, press the PTT button to send the
message. Two high pitched tones will be heard
during transmission.
If successful, two high pitched tones will be heard
to indicate the message was successfully delivered
to the target phone.
If unsuccessful, an alert tone will be heard to
indicate that the targeted unit is busy, out-of-range,
or turned-off.
In either case, the phone will return to the status
screen after 3 seconds.
56

Receiving a Status Message

The phone will receive a message along with alert
tones. To silence the recurring alert tones only,
press any key or press A under Clear.
If a non-aliased ID is sent, press A under Store to
store the ID.
Note: All calls remain blocked until this message
is cleared.