Emergency Group Call - Motorola i325 User Manual

Advanced Features
Responding to a Secondary
Talkgroup
1 To respond to a call on a Secondary Talkgroup,
press the PTT button.
Turning Scan On and Off
1 From Settings select DC/GC Options.
Select Scan under On or Off. -or
Press A to disable Scan.
Note: When Scan is disabled, you will not be
able to make or receive calls on your
Secondary Talkgroups.
52
Storing a Talkgroup or Hub in
Contacts
Although your service provider establishes the
members of a Hub, you can store a Group or Hub
in your Contacts.

Emergency Group Call

You can prioritize access to a specified Hub. This
specific Hub is stored on the phone's SIM card.
The emergency Group call shall be initiated on the
primary talkgroup of a pre-programmed Group
when the [SPEAKER KEY GRAPHIC] is pressed
and held for 3 seconds:
When the emergency button is pressed, the phone
shall immediately provide access to the designated
emergency Group. If the emergency button is
pressed when the phone is transmitting or
receiving (Private calls, including E911 calls or
data transmit or receive, etc.), it shall immediately
terminate or clear any ongoing activity or screen
and provide access to the designated emergency
Group.