Windows XP SP1.
Appendix 4 FAQs
This section provides solutions to problems that may occur
during installation and operation of the device. Read the following
if you are running into problems. If your problem is not covered
here, please go to our website of www.tendacn.com or e‐mail to
support@tenda.cn for help.
1. Q: I entered the device's LAN IP address in the web browser but
cannot access the utility. What should I do?
1) Verify physical connectivity by checking whether a
corresponding port's link LED lights up. If not, try a different cable.
Note that an illuminated light does NOT ALWAYS indicate
successful connectivity.
2) In Wireless Router Mode, you must use a wireless network
adapter to connect to the device, as the only Ethernet port works
as a WAN port for Internet connection; while in Wireless AP,
Universal Repeater Mode and Client Mode, you must specify an IP
address (192.168.2.2 ~ 192.168.2.254) on your PC to connect to the
device.
3) Click "Start" ‐‐ "Run", enter "cmd" and then"ping
192.168.2.1"on appearing CLI to diagnose whether your PC has
79