Connections; Connecting The Speakers - Philips - MCD700 User Manual

Speaker
(right)
AC power cord
IMPORTANT!
– The type plate is located at the
bottom of the system.
– Before connecting the AC power
cord to the wall outlet, ensure that all
other connections have been made.
– Never make or change any
connections with the power switched
on.

Connecting the speakers

Connect the speakers to the SPEAKERS (8Ω)
terminals with two speaker cables. Right
speaker to "R" and left speaker to "L", red wire
to "+" and silver wire to "-". Fully insert the
stripped portion of the speaker wire into the
terminal as shown.
AM antenna
FM
antenna
1
1
Notes:
– Ensure that the speaker cables are correctly
connected. Improper connections may damage the
system due to short-circuit.
– For optimal sound performance, use the supplied
speakers.
– Do not connect more than one speaker to any
one pair of +/- speaker jacks.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.

Connections

Speaker
(left)
2
For MCD700
2
For MCD702
11