Screen Saver; Audio Setup Page; Spdif Setup; Dolby Digital Setup - Philips - MCD700 User Manual

2
Enter its submenu by pressing 2.
3
Move the cursor by pressing 3 4 to highlight
the selected item.
➜
On: Enable Closed Captions.
➜
Off: Disable Closed Captions.

Screen Saver

This function is used to turn the screen saver on
or off.
➜
On: In STOP, PAUSE or No DISC mode, if no
actions are performed about 3 minutes, the
screen saver will be activated.
➜
Off: Screen saver is disabled.

Audio Setup Page

The options included in Audio Setup page are:
"SPDIF Setup", "Dolby Digital Setup", "3D
Processing", "HDCD" and "D.R.C".

SPDIF Setup

The options included in SPDIF (Sony/Phillips
Digital Interface Format) Setup Page are: "SPDIF
Off ", "SPDIF/RAW" and "SPDIF/PCM".
System Menu Options
➜
SPDIF Off: Turns off the SPDIF output.
➜
SPDIF/RAW: If you have connected your
DIGITAL OUT (COAXIAL or OPTICAL) to a
multi-channel decoder/receiver.
➜
SPDIF/PCM: Only if your receiver is not
capable of decoding multi-channel audio.

Dolby Digital Setup

The options included in Digital Audio Setup are:
"Dual Mono" and "Dynamic".
Dual Mono
Select the setting that matches the number of
speakers you have connected.
➜
Stereo: Left mono sound will send output
signals to Left speaker and Right mono sound
will send output signals to Right speaker.
➜
L-Mono: Left mono sound will send output
signals to Left speaker and Right speaker.
➜
R-Mono: Right mono sound will send output
signals to Left speaker and Right speaker.
Dynamic
Optimise the dynamic sound output. High
volume outputs are softened, enabling you to
watch your favourite movie without disturbing
others.
➜
The levels for dynamic selection: FULL, 3/4, 1/
2, 1/4 and OFF.
Note:
– DTS surround audio output is not available in
this DVD player.
27