Table of Contents
Advertisement
EN
Prompt
Select Network
Select Network Type
Select Encryption
Edit IP Address
18
Configuration
Introduction
The SLA5500 has a Configuration Wizard that guides you through the process of
configuring network profiles for your SLA5500. The Configuration Wizard is used
when you want to:
•
Install the SLA5500 for the first time.
•
Make later changes to a network profile setting.
This chapter describes:
•
Information you will need to configure the wireless network profile for the
SLA5500
•
Structure of the Configuration menu
•
How to use the Configuration Wizard to change network profile settings
Network Information needed by the Configuration Wizard
The Configuration Wizard will guide you through the setup process, prompting you
to edit one or more of the following settings. Before proceeding, make sure that you
have the following information in front of you:
Option Selected
SSID
Enter Network SSID
Infrastructure
(Access Point available)
Ad Hoc
WEP
Automatic (DHCP)
Static IP Address
Note: The SLA5500 determines some settings automatically during its search for an
available wireless network. It may therefore not need to prompt you for all of
the above settings during the setup process.
Information You Need To Know
Current Network SSID (to confirm)
Alternative Network SSID
Is there an Access Point available
on the wireless network?
Key Index and Encryption Key
Is a DHCP Server Available?
IP Address (for SLA5500)
Subnet Mask
Gateway
Preferred DNS Server
Alternate DNS Server
Advertisement
Table of Contents
