Table of Contents
Advertisement
EN
34
Verifying that a Wireless Music Link is Available on the
Network
When you start the Philips Wireless Music Receiver PC Utility, it performs an
automatic discovery process to verify which Wireless Music Links are available on the
network. It is recommended that you perform this discovery process manually after
editing any network profiles, to ensure that your computer can still communicate
with the SLA5500.
To verify that a SLA5500 is available on the network:
1 From the main Philips Wireless Music Receiver PC Utility window, click the
'Discover...' button.
A list of available Wireless Music Links will be displayed in the main window.
Uploading New Software to the SLA5500
Check www.philips.com/support for new software versions. When new software
becomes available, the Software Upload Wizard in the Philips Wireless Music
Receiver PC Utility will help you to install it on your SLA5500.
WARNING: The Software Upload Wizard should be used with great care.
Uploading incorrect software may result in the SLA5500 no longer
working as expected.
1 Start the Philips Wireless Music Receiver PC Utility (see 'Starting the Philips
Wireless Music Receiver PC Utility').
2 From the main Philips Wireless Music Receiver PC Utility window, highlight the
SLA5500 to be upgraded and click the 'Upload Software...' button.
3 The wizard displays details of the currently installed software for the SLA5500 and
a warning notice. Click the 1 button to cancel the upload or the 'Next' button to
proceed.
4 Select a valid software file (.bcd file) and click the 'Open' button. If the file
selected is invalid, an error will be displayed.
5 The wizard displays a warning and asks for confirmation. Click the 1 button to
cancel the upload or the 'Next' button to proceed.
Note: This process may take a while and should not be interrupted. The current
software is erased and the new software is uploaded to the SLA5500.
A message is displayed when the upload has been completed successfully. If an
error message appears, or if you see the words 'Download mode' in the Active
Profile column instead, it means that the software upload has failed. Turn the
power to the SLA5500 off and on again before starting a new upload attempt.
Advertisement
Table of Contents
