Fluke 123B User Manual page 70

123B/124B/125B
Users Manual
W Caution
Do not use the USB port to directly
communicate with an external device.
To set up the Test Tool for use with a wireless
connection:
1. Push  + 1 to turn on the WiFi.  shows in the
Information area.
2. For the first-time setup, push  to open the Menu.
YZ
3. Use to highlight USER OPTIONS.
4. Push  to open the USER OPTIONS menu.
YZ
5. Use to highlight Information.
6. Push  to open the INFORMATION menu.
7. Push 1 to open the WiFi Settings menu.
60
The menu shows:
•
WiFi name. The SSID is used to detect the Test Tool
WiFi.
•
IP Address. Additional information about the
connection and not required to establish a
connection.
Push  + 1 to turn off WiFi.  disappears from the
top of the screen in the Information area.