Safety Notes - Chauvet COLORDASH PAR-QUAD 7 Quick Reference Manual

COLORdash™ Par-Quad 7 QRG
About this
Guide
Disclaimer

Safety Notes

Contact
What Is
Included
AC Power
Power Linking
AC Plug
Fuse
Replacement
The COLORdash™ Par-Quad 7 Quick Reference Guide (QRG) has basic
product information such as connection, mounting, menu options, and
DMX values. Download the User Manual from
for more details.
The information and specifications contained in this QRG are subject to
change without notice.
·
DO NOT open this product. It contains no user-serviceable parts.
·
DO NOT look at the light source when the product is on.
·
CAUTION: This product's housing may be hot when lights are
operating.
·
Mount this product in a location with adequate ventilation, at least
20 in (50 cm) from adjacent surfaces.
·
DO NOT leave any flammable material within 50 cm of this product
while operating or connected to power.
·
USE a safety cable when mounting this product overhead.
·
DO NOT operate this product outdoors or in any location where dust,
excessive heat, water, or humidity may affect it.
·
DO NOT operate this product if the housing, lenses, or cables appear
damaged.
·
DO NOT connect this product to a dimmer or rheostat.
·
ONLY connect this product to a grounded and protected circuit.
·
ONLY use the hanging/mounting bracket to carry this product.
·
In the event of a serious operating problem, stop using immediately.
·
The maximum ambient temperature is 104 °F (40 °C). Do not operate
this product at higher temperatures.
Outside the U.S., United Kingdom, Ireland, or Mexico, contact your
distributor to request
www.chauvetlighting.com
·
COLORdash™ Par-Quad 7
·
Neutrik® powerCON® power cord
·
Gel frame holder
(7.5 in/191 mm accessories)
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
You can link up to 21 COLORdash™ Par-Quad 7 products at 120 VAC or
39 at 230 VAC. Never exceed this number. Power linking cords can be
purchased separately.
Connection
AC Live
AC Neutral
AC Ground
1. Disconnect this product from power.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the
housing.
3. Remove blown fuse and replace with a good fuse of the same type and
rating.
4. Screw the fuse holder cap back in place and reconnect power.
support or
for contact information.
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow Green/Yellow
2
www.chauvetlighting.com
return a product.
·
Gel frame
·
Warranty Card
·
Quick Reference Guide
Screw Color
Brown Yellow/Brass
Blue
EN
Visit
Silver
Green