Safety Notes - Chauvet Q-Spot 560 Quick Reference Manual

Q-Spot™ 560 LED QRG
About this The Q-Spot™ 560 LED Quick Reference Guide (QRG) has basic product
information such as connection, mounting, menu options, and DMX values.
Guide
Download the User Manual from
details.
Disclaimer
The information and specifications contained in this QRG are subject to
change without notice.
•

Safety Notes

•
•
•
•
•
•
•
•
•
•
•
•
Contact Outside the U.S., UK, or Ireland, contact your dealer to request support or
return a product. Visit
•
What Is
•
Included
•
AC Power This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
AC Plug
Fuse 1.
2.
Replacement
3.
4.
All manuals and user guides at all-guides.com
DO NOT open this product. It contains no user-serviceable parts.
DO NOT look at the light source when the product is on.
CAUTION! This product's housing is hot when lights are operating.
Mount this product in a location with adequate ventilation, at least 20 in
(50 cm) from adjacent surfaces.
DO NOT leave any flammable material within 50 cm of this product
while operating or connected to power.
USE a safety cable when mounting this product overhead.
DO NOT operate this product outdoors or in any location where dust,
excessive heat, water, or humidity may affect it.
DO NOT operate this product if the housing, lenses, or cables appear
damaged.
DO NOT connect this product to a dimmer or rheostat.
ONLY connect this product to a grounded and protected circuit.
ONLY use the hanging/mounting bracket or the handles to carry this
product. DO NOT carry by the moving head.
In the event of a serious operating problem, stop using immediately.
The maximum ambient temperature is 104° F (40° C). Do not operate this
product at higher temperatures.
www.chauvetlighting.com
Q-Spot™ 560 LED
Power Input Cord
2 Omega Brackets (for mounting)
Connection Wire (U.S.)
AC Live Black
AC Neutral White
AC Ground Green/Yellow
Disconnect this product from the power outlet.
Wedge the tip of a flat-head screwdriver into the slot of the fuse holder
and pry the safety cap out of the housing.
Remove the blown fuse from the safety cap and replace with a fuse of
the exact same type and rating (T 5 A, 250 V).
Insert the fuse holder back in place and reconnect power.
www.chauvetlighting.com
•
Safety Cable
•
Warranty Card
•
Quick Reference Guide
Wire (Europe)
Brown
Blue
Green/Yellow
2
EN
for more
for contact information.
Screw Color
Yellow/Brass
Silver
Green