Table of Contents
Advertisement
3.Power
4. Indicators
Notes:
Press WPS and Power buttons simultaneously, and hold on about three seconds until all LEDs are off,
•
then release the buttons, the device will restart automatically and restore to the factory default settings.
Indicators
When the device is powered on, the following icons will light, with the corresponding indications listed in
the table below:
Indicators
Battery Indication
Wi-Fi Indication
Network
Indication
Hardware Installation
Inserting SIM Card, Memory Card and Battery
1. Use the thumb catch on the device to open the battery cover.
Hold the Power button to switch on/off the device.
Indicates the status of your device.
Status
Please charge.
RED glittering
The voltage of battery is low.
RED bright
The voltage of battery is high.
GREEN bright
Fully charged.
Charging when power on
GREEN
Power off
glittering
Low power mode
Fully charged when power off without USB cable
No charging or fully charged under low power mode without
LED off
USB cable
No battery
Wi-Fi is active.
BLUE glittering
WPS is active.
BLUE bright
Wi-Fi is inactive
LED off
2G Modem data transferring.
BLUE glittering
Register on 2G network.
BLUE bright
GREEN
3G Modem data transferring.
glittering
Register on 3G network.
GREEN bright
ERROR
LED off
Confidential and Proprietary Information of ZTE CORPORATION 3
Description
or
low power mode.
or
NO network service
or
No SIM
or
low power mode.
Advertisement
Table of Contents
