Enter Time And Date - Siemens SIMATIC HMI KTP400 Basic Operating Instructions Manual

5.10

Enter time and date

1. Touch the "Date & Time" icon.
2. Press the "Date & Time" button.
3. If you are using a time server
(NTP=ON), set a time shift with
the selection wheel under
"Time shift", if required.
If you are not using a time server
(NTP=OFF), set the desired time
and the desired time shift with the
selection wheel.
The resulting local time is
displayed under "Localtime".
Basic Panels 2nd Generation
Operating Instructions, 10/2016, A5E33293231-AB
Configuring the device
5.10 Enter time and date
57