Setup; Overview; Attaching And Removing A Stand; Attaching And Removing A Recline Stand - HP EliteOne 800 G3 Hardware Reference Manual

2

Setup

Overview

Set up the computer in the following order:
Attach a stand. See
●
Or
Attach the computer to a mounting fixture. See
Connect the cables for peripherals and power. See
●
Connect an additional display, if desired. See
●
Install and secure the rear port cover. See
●
Select a comfortable computer position and viewing angle. See
●
Install a security cable for security. See
●
Turn on the power. See
●
The mouse and keyboard are synchronized at the factory. Should you ever need to synchronize the mouse
●
and keyboard again, see

Attaching and removing a stand

Two stands are available for the computer:

Attaching and removing a recline stand

●
Attaching and removing an adjustable height stand
●
Attaching and removing a recline stand

Attaching a recline stand

To install the stand:
1. Place the computer face down on a soft flat surface. HP recommends that you set down a blanket, towel,
or other soft cloth to protect the bezel and screen surface from scratches or other damage.
2. Engage the hooks in the top of the stand in the two large holes in the upper part of the back of the
computer (1).
Attaching and removing a stand on page
Installing the rear port cover on page
Installing a security cable on page
Connecting power on page
Synchronizing the optional wireless keyboard and mouse on page
7.
Attaching the computer to a mounting fixture on page
Connecting and disconnecting cables on page
Connecting a display on page
Positioning the computer on page
18.
11.
11.
13.
14.
18.
20.
Overview
10.
7