Installing The Rackswitch G8264T In A Standard Equipment Rack - IBM RackSwitch G8264T Installation Manual

Installing the RackSwitch G8264T in a standard equipment rack

20
RackSwitch G8264T: Installation Guide
This section describes how to install the RackSwitch G8264T in a standard 19-inch
equipment rack. For information about mounting the G8264T in other rack types,
refer to the following sections:
• "Installing the RackSwitch G8264T in an IBM iDataPlex rack" on page 22
• "Installing the RackSwitch G8264T in an IBM System x rack" on page 25
The following table lists the parts included in the standard mounting kit.
Table 10. 2-Post Rack Mount Kit Parts
Item number
1
2
3
4
5
6
Attention: For earthquake stability, mount the switch in a 4-post rack.
Description
M6 locking washers
M6 screws
M6 clip nuts
M6 cage nuts
M4 screws
Mounting bracket
Quantity
4
4
4
4
8
2