Operation Manual; Names Of Parts - Daikin K-Series Service Manual

SiBE061121.book Page 46 Friday, April 22, 2011 4:12 PM

Operation Manual

2. Operation Manual

2.1

Names of Parts

Name of Parts
Indoor Unit
Air outlet
Radiant panel
Front panel
Air inlet
Signal receiver and Indoor
unit ON/OFF switch
Signal receiver
• It receives signals from the remote controller.
• When the unit receives a signal, you will hear
a beep sound.
Case
Operation start
Setting changed
Operation stop
Indoor unit ON/OFF switch
• Press this switch once to start operation.
Press once again to stop it.
• The operation mode refer to the following table.
Mode
AUTO
• This switch is useful when the remote controller is missing.
5
46
Room temperature sensor
• It detects the air temperature around the unit.
Display
Sound type
beep-beep
beep
long beep
Temperature setting Airfl ow rate
25˚C AUTO
Louvers (vertical blades)
• The louvers are inside of the air outlet.
Flap (horizontal blade)
TIMER lamp (yellow)
OPERATION lamp
(green)
RADIANT lamp (red)
SiBE061121
Page 14
Page 14
Page 12
Operation Manual