Schematics, Board Layouts, and Parts Lists: Introduction
Chapter 9 Schematics, Board Layouts, and Parts Lists
9.1
Introduction
This chapter contains the schematics, board
layouts, and parts lists for the XTS 5000 radio.
Use them in conjunction with the theory of
operation and the troubleshooting procedures,
charts, and waveforms to isolate a problem to
the component level. In the schematics, the red
color denotes voltage paths, blue denotes the
receive path, and green denotes the transmit
path.
The following table lists the pages where the
schematics and board layouts for the XTS 5000
radio are found.
68P81094C31-O
9.2
List of Schematics and Board
Overlays
Schematic/Board Layout
Page No.
Transceiver (RF) Board Overall Circuit
9-2
Schematic
Antenna Switch and Harmonic Filter Circuits
9-3
Receiver Front End Circuit
9-4
Receiver Back End Circuit
9-5
Transmitter and Automatic Level Control
9-6
Circuits
Frequency Generation Unit (Synthesizer)
9-7
Circuit
Frequency Generation Unit (VCO) Circuit
9-8
Transceiver (RF) Board Layout—Side 1
9-9
Transceiver (RF) Board Layout—Side 2
9-10
VOCON Board Overall Schematic
9-16
VOCON Universal Connector Circuit
9-18
VOCON Flipper Circuit
9-19
VOCON Controller and Memory Circuits
9-20
VOCON Audio and DC Circuits
9-22
VOCON Board Layout—Side 1
9-23
VOCON Board Layout—Side 2
9-24
9-1
April 15, 2002