Copy/Save Configuration Files - Cisco SF220-24 Administration Manual

Administration: File Management
Configuration File Properties
STEP 6
Configuration File Properties
STEP 1
STEP 2

Copy/Save Configuration Files

Cisco 220 Series Smart Switches Administration Guide Release 1.1.0.x
Locate where to save the selected configuration file or flash log, click Save.
Use the Configuration Files Properties page to see when various system
configuration files are created. It also enables deleting the Startup Configuration
and Backup Configuration files. You cannot delete the other configuration file
types.
To clear configuration files and/or see when configuration files are created:
Click Administration > File Management > Configuration Files Properties.
The following fields are displayed:
• Configuration File Name—The type of file.
• Creation Time—The date and time that file was modified.
If required, select either the Startup Configuration, Backup Configuration, or both
and click Clear Files to delete these files.
When you click Apply on any window, changes that you made to the switch
configuration settings are stored only in the Running Configuration. To preserve
the parameters in the Running Configuration, the Running Configuration must be
copied to another configuration type or saved as a file on another device.
Use the Copy/Save Configuration page to copy or save one configuration file to
another for backup purposes. The bottom of the page has a button, Disable Save
Icon Blinking. Click to toggle between disable and enable.
4
52