Table of Contents
Advertisement
Administration: Discovery
Configuring LLDP
Cisco 220 Series Smart Switches Administration Guide Release 1.1.0.x
•
Current Capabilities—MED capabilities enabled on the port.
•
Device Class—LLDP MED endpoint device class.
•
PoE Device Type—(Only applicable for PoE models) Port PoE type, for
example, powered.
•
PoE Power Source—(Only applicable for PoE models) Port power source.
•
PoE Power Priority—(Only applicable for PoE models) Port power priority.
•
PoE Power Value—(Only applicable for PoE models) Port power value.
•
Hardware Revision—Hardware version.
•
Firmware Revision—Firmware version.
•
Software Revision—Software version.
•
Serial Number—Device serial number.
•
Manufacturer Name—Device manufacturer name.
•
Model Name—Device model name.
•
Asset ID—Asset ID.
Location Information
•
Civic—Street address.
•
Coordinates—Map coordinates: latitude, longitude, and altitude.
•
ECS ELIN—Emergency Call Service (ECS) Emergency Location
Identification Number (ELIN).
Network Policy Table
•
Application Type—Network policy application type, for example, Voice.
•
VLAN ID—VLAN ID for which the network policy is defined.
•
VLAN Type—VLAN type for which the network policy is defined. The
possible field values are:
Tagged
-
—Indicates the network policy is defined for tagged VLANs.
-
Untagged
—Indicates the network policy is defined for untagged VLANs.
•
User Priority—Network policy user priority.
•
DSCP—Network policy DSCP.
8
93
Hide quick links:
Advertisement
Table of Contents
