Phone Service Only (Fttb Or Fttn) - Technicolor TG799 Installation Manual

FIGURE 6 – PHONE SERVICE
ONLY (FTTB OR FTTN)
This configuration is for new phone services delivered over an NBN FTTB or
FTTN connection when there are no existing working services in the premises.
1. Connect your HNG as shown in the figure below. Then follow the instructions under
'Step-by-Step Guide to Installing the HNG' on page 6.
2. To avoid interference and performance degradation, the HNG must be connected
to the main telephone socket in your premises on its own, with all other internal
cabling and existing telecommunications equipment disconnected (e.g. facsimile
and security alarms). If required, a qualified electrician or licensed cable installer can
re-connect your internal in-home cabling as shown in the diagram with a dotted line.
14