Wan Settings - Tenda W3002R User Manual

W3002R
Wireless N300 High Power Router

4.2 WAN Settings

DHCP (Dynamic IP)
DHCP (Dynamic IP): Select this option to let router obtain IP settings
automatically from your ISP if you are online immediately when your computer
connect to the ADSL/Cable modem directly.
MTU: Maximum Transmission Unit. DO NOT change it from the factory
default of 1500 unless necessary. You may need to change it for optimal
performance with some specific websites or application software that cannot be
opened or enabled; in this case, try 1450, 1400, etc.
PPPoE
Use this option if you used to connect to the Internet Using a Broadband
Connection that requires a username and password
18