10.2
OMCI information
ONU Management Control Interface (OMCI) defines a mechanism and message format that is used
by the Optical Line Termination (OLT) to configure, manage, and monitor ONTs.
To access the page, log in to the web UI of the ONT and choose Admin > OMCI Information. You
can click Refresh to update the information.
10.3
Commit/Reboot
This page is used to commit any configuration changes you have made and reboot the ONT to put
the changes into effect. Click Commit and Reboot to save settings and reboot the ONT.
To access the page, log in to the web UI of the ONT and choose Admin > Commit/Reboot.
10.4
Backup/Restore
On this page, you can back up the configuration of the ONT, restore the configuration from a
backup file, and reset the ONT.
To access the page, log in to the web UI of the ONT and choose Admin > Backup/Restore.
86
Admin