Wan Settings - Tenda F1200 User Manual

Wireless ac1200 dual-band router

Table of Contents

192.168.10.1.

Click Save to save your settings.

②

Tip ---------------------------------------------------------------------------------------

1. Default IP address and subnet mask are respectively 192.168.0.1 and

255.255.255.0.

2. This router does not support VLSM.

3. Be sure to make a note of any changes you apply to this page. If you change the

LAN IP address of the router, you have to open a new connection to the new IP

address and log in again.

-----------------------------------------------------------------------------------------------

2.2. WAN Settings

Click Network -> WAN to configure your Internet connection settings. Select your

Internet connection type:

Select PPPoE if your ISP provides you with a PPPoE user name and a PPPoE

password.

Select Static IP if your ISP provides you with fixed or static IP address settings

(special deployment by ISP; this is rare).

Select DHCP (Dynamic IP) if you can access the Internet simply by directly

connecting your computer to an Internet-enabled ADSL/Cable modem without

configuring any settings.

PPPoE

Table of Contents