Functions That Cannot Be Used Simultaneously When Shooting - Nikon COOLPIX W300 Reference Manual

Functions That Cannot Be Used Simultaneously
When Shooting
Some functions cannot be used with other menu settings.
Restricted function
Flash mode
Self-timer
Macro mode
Image mode
White balance
Continuous
ISO sensitivity
Shooting Features

Functions That Cannot Be Used Simultaneously When Shooting

Setting
Continuous (A131)
Blink proof (A139)
Underwater flash
(A169)
AF area mode (A134)
AF area mode (A134)
Continuous (A131)
Hue (using the creative
slider) (A47)
Self-timer (A52)
Continuous (A131)
Description
When a setting other than Single is
selected, the flash cannot be used.
When Blink proof is set to On, the flash
cannot be used.
When Underwater flash is set to On,
Auto with red-eye reduction cannot
be selected. If Auto with red-eye
reduction was selected beforehand, the
setting changes to Auto.
When Subject tracking is selected, the
self-timer cannot be used.
When Subject tracking is selected,
macro mode cannot be used.
Image mode is set as follows depending
on the continuous shooting setting:
Pre-shooting cache: M (image size:
1280 × 960 pixels).
Continuous H: 120 fps: O (image
size: 640 × 480 pixels)
Continuous H: 60 fps: M (image
size: 1280 × 960 pixels)
When hue is adjusted using the creative
slider, White balance in the shooting
menu cannot be set. To set White
balance, select P in the creative slider
setting screen to reset the brightness,
vividness, hue, and Active D-Lighting.
When the self-timer is used, a single shot
is taken even if Pre-shooting cache has
been set.
When Pre-shooting cache, Continuous
H: 120 fps, or Continuous H: 60 fps is
selected, ISO sensitivity is fixed at Auto.
64