View Log; Set Clock From Satellite - Nikon COOLPIX W300 Reference Manual

View Log

Press the d button M z menu icon M View log M k button
Check or erase the log data saved on the memory card using Create log (A158).
Option
Location logs
Altitude/depth logs

Set Clock from Satellite

Press the d button M z menu icon M Set clock from satellite M k button
Signals from the positioning satellites are used to set the date and time of the
camera's internal clock. Check the positioning status before setting the clock using
this option.
B
Notes About Set Clock from Satellite
To set the camera's internal clock, positioning must have been done successfully (A95).
Date/time adjustment by Set clock from satellite is set according to the time zone set in
Time zone and date (A162) in the setup menu. Check the time zone before setting Set
clock from satellite.
The date/time set using Set clock from satellite is not as accurate as radio clocks. Use
Time zone and date in the setup menu to set the time if it is not accurate when set using
Set clock from satellite.
Using the Menu
The Location Data Options Menu
A list of logs (dates) is displayed.
Press the l (delete) button to delete the selected log or
all saved location logs.
You can view location logs by using software that can display
log data such as ViewNX-i (A115).
Select a log (date) that you want to display and press the
k button to display the altitude or water depth data as a
graph (A104).
Press the l (delete) button to delete the selected log or
all saved altitude/depth logs.
159
Description