Nikon COOLPIX W300 Reference Manual page 220

External Device Issues
Problem
Cannot establish a
wireless connection
with a smart device.*
Cannot upload images
to a smart device that
has a wireless
connection established
with the SnapBridge
app.*
Technical Notes
Troubleshooting
Cause/Solution
When establishing a wireless connection for the
first time, follow the instructions in the included
"SnapBridge Connection Guide" and pair.
If the devices are paired, follow the instructions in
the included "SnapBridge Connection Guide" to
unpair and then re-pair.
Check the Network menu settings in the camera.
- Set Airplane mode to Off.
- Set Bluetooth M Connection to Enable.
If the camera is paired with two or more smart
devices, select the smart device you want to
connect in Network menu M Paired devices in
the camera.
Use a sufficiently charged battery.
Insert a memory card with sufficient free space
into the camera.
Disconnect the HDMI cable or USB cable.
Enable Bluetooth, Wi-Fi, and the location data
functions on the smart device.
Enable Auto link in the y Connect tab in the
SnapBridge app. If it is disabled, Remote
photography and Download selected
pictures can be used, but images cannot be
downloaded automatically.
Perform the operations described below when
uploading automatically.
- Set Still images in Network menu M Send
while shooting in the camera to Yes.
- Enable Auto link in the y Connect tab in the
SnapBridge app.
- Turn on Auto download in the y Connect
tab in the SnapBridge app.
- If Network menu M Bluetooth M Send
while off in the camera is set to Off, turn on the
camera or change the setting to On.
Insert a memory card into the camera. Images
saved in the internal memory cannot be
uploaded.
You may not be able to upload images or
uploading may be canceled while the camera is
being operated.
202
A
–
153
–
–
154
11
–