Nikon COOLPIX W300 Reference Manual page 218

Problem
The recorded location
name is different from
the intended one or is
not displayed.
Unable to update the A-
GPS file.
Unable to turn off the
altimeter or depth
gauge.
The altitude/water depth
and atmospheric pressure
icons remain displayed on
the shooting screen.
Unable to display the
altimeter or depth
gauge even when
Altimeter/depth
gauge is set to On.
Water depth shows 0 m
Unable to select Use
location data of Alt./
depth correction in
the location data
options menu.
Technical Notes
Troubleshooting
Cause/Solution
The desired landmark name may not be registered,
or a different landmark name may be registered.
Check the following items:
- Whether the memory card is inserted
- Whether the A-GPS file is saved on the memory card
- Whether the A-GPS file saved on the memory
card is more recent than the A-GPS file saved in
the camera
- Whether the A-GPS file is still valid
The A-GPS file may be corrupted. Download the
file from the website once more.
When On is selected for Altimeter/depth gauge in
Altitude/depth options in the location data options
menu, the altimeter or depth gauge is always displayed
regardless of Monitor settings in the setup menu.
To turn off the altimeter or depth gauge, set the
Altimeter/depth gauge to Off.
Hide info is selected for Photo info in Monitor
settings in the setup menu.
Even when Altimeter/depth gauge is set to On,
the altimeter or depth gauge is not displayed in the
following situations:
When the shutter-release button is pressed halfway
During shooting in the Easy panorama scene mode
Creative mode
During movie recording
When a subject is registered using Subject
tracking in AF area mode
When a message is being displayed
The water depth will be displayed as 0 m if the
camera is not submerged underwater when the
Underwater scene mode is selected.
Off is selected for Use built-in location data in
the location data options menu.
This function cannot be selected unless signals are
received from four or more satellites and
positioning has been performed.
The camera is submerged underwater. This function
cannot be selected during underwater shooting.
200
A
–
–
99
161
164
–
37
40
80
134
–
36
156
95
–