Keyboard
CAUTION:
this document.
NOTICE:
periodically touching an unpainted metal surface (such as the back panel) on the computer.
Turn the computer top-side up and open it.
1
display
palm rest
Remove the center control cover:
2
Open the display all the way (180 degrees) so that it lies flat against your work surface.
a
Starting on the right side of the computer, use a plastic scribe to pry up the center control
b
cover. Lift it away from the computer, and lay it aside.
112
Adding and Replacing Parts
Before performing the following procedures, read the safety instructions at the beginning of
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
center control cover