Enabling The Display Settings For A Television - Dell Inspirion 510m Owner's Manual

Plug the two RCA connectors on the other end of the audio cable in to the audio input
6
connectors on your television or audio device.

Enabling the Display Settings for a Television

Intel UMA Integrated Video Controller
NOTE:
Ensure that you properly connect the television before you enable the display settings.
Click the Start button and click the Control Panel icon. Under Pick a Category, click
1
Appearance and Themes.
Double-click the Display icon, click the Settings tab, and then click Advanced.
2
Click the Intel (R) Extreme Graphics tab.
3
Click the Graphic Properties button.
4
If you want to use only a television without using the computer display or any other display
5
options:
In the new window, click Television so that a red check mark appears over the television
a
icon.
Ensure that the settings are correct.
b
If you want to use a television and the computer display at the same time:
6
In the new window, click Intel (R) Dual Display Clone and ensure that one of the
a
devices listed is a television.
Click Device Settings.
b
In the new window, ensure that the display resolution settings are correct.
c
Click Apply to view the new settings.
7
70
Using CDs, DVDs, and other Multimedia