Storage Tank Working Clearances - A.O. Smith SGS-28 Installation, User And Service Manual

7.2.5
n
0311753_SGS_28-120_II_UKUK_V2.0 , 2017-05-03

Storage tank working clearances

For access to the storage tank, it is recommended that the following clearances are
observed:
• All sides of the storage tank: 50 cm.
• Above the storage tank (space for anode replacement): 100 cm.
Note
When installing the storage tank, be aware that any leakage can cause damage to the
immediate environment or floors below the level of the boiler room. If this is the case, the
water heater should be installed above a waste water drain or in a suitable metal leak
tray.
55