Introduction and Ordering: Auxiliary Equipment
1.4.3
Recommended Cabling
The APX 7500 Consolette has several ports and supports many different style cables. The chart in
this section describes the functionality required along with the corresponding Consolette port
locations and the supported cable kits.
Function(s)
CPS Programming (USB) the
transceiver.
Flash Programming (USB) both
the transceiver and the
Consolette controller card.
Radio packet data applications
(USB)
Radio packet data applications
(RS232)
Tactical OTAR (RS232)
Consolette Configuration
(Ethernet)
Consolette Configuration (USB)
Keyloading (all keys)
All other cabling must be built by the customer. Refer to Chapter 6 for detailed cabling diagrams.
68009482001
Table 1-1. Cabling Chart
Connector Location
GCAI on O5 Control Head or
AUX GCAI on front panel
GCAI on O5 Control Head or
AUX GCAI on front panel
Ethernet/LAN connector on rear
of Consolette.
USB-B connector on rear of
Consolette
AUX GCAI on front of Consolette
Cable
HKN6184_
HKN6183_
OTS CAT5 Ethernet Cabling.
OTS USB-A to USB-B cable
TKN8531_
HKN6182_
September 9, 2011
1-5