Specifications - Sony SDM-H246W Operating Instructions Manual

Specifications

LCD panel
Panel type: a-Si TFT Active Matrix
Picture size: 24 inch
Input signal format
RGB operating frequency*
Horizontal: 28–92 kHz (analog RGB)
28–75 kHz (digital RGB)
Vertical: 56–85 Hz (analog RGB)
60 Hz (digital RGB)
Analog component video: 480i, 480p, 576i, 720p, 1080i
Resolution
Horizontal: Max.1,920 dots (Only when the vertical
frequency is set to 60 Hz, the horizontal resolution is
1,600 dots or more.)
Vertical: Max.1,200 lines (Only when the vertical
frequency is set to 60 Hz, the vertical resolution is fixed
to 1,200 lines.)
Input signal levels
Analog RGB video signal:
0.7 Vp-p, 75 Ω, positive
SYNC signal:
TTL level, 2.2 kΩ, positive or negative (Separate
horizontal and vertical, or composite sync)
Component video (Y, P
B
Y: 1.0 Vp-p, 75-ohm unbalanced, sync negative
: 0.7 Vp-p, 75 Ω
P
B
: 0.7 Vp-p, 75 Ω
P
R
Digital RGB (DVI) signal: TMDS (Single link)
Audio input
Stereo minijack, 0.5 Vrms
HDMI (video, digital RGB)
Video: 480p, 576p, 720p, 1080i, 1080p
Audio: Two channel linear PCM 32, 44.1 and 48 kHz, 16,
20 and 24 bits
Audio output
Stereo minijack
USB port
USB 2.0 High Speed (480Mbps)
Power requirements
100–240 V, 50–60 Hz, Max. 1.2 A
Operating temperature
5–35 C
°
Dimensions (width/height/depth)
Display (upright):
Approx. 560 × 452 × 196 mm (with stand)
1 × 17 7 × 7
(22 / /
8 8
Approx. 560 × 374.5 × 100 mm (without stand)
1 × 14 3 × 4 inches)
(22 / /
8 4
Mass
Approx. 10.7 kg (23 lb 9 oz) (with stand)
Approx. 8.1 kg (17 lb 14 oz) (without stand)
Plug & Play
DDC2B
Accessories
See page 8.
, P ) (Phono jack) :
R
3
/ inches)
4
* Recommended horizontal and vertical timing condition
• Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µsec, whichever is larger.
• Horizontal blanking width should be more than 2.5 µsec.
• Vertical blanking width should be more than 450 µsec.
Design and specifications are subject to change without notice.
27
(GB)