Setup 9: Connect A Video Equipment; Selecting The Input Signal - Sony SDM-H246W Operating Instructions Manual

Setup 9: Connect a video
equipment
Connect a video equipment with an HDMI output
connector
to HDMI output connector
of the video equipment
HDMI cable (not supplied)
Connect a video equipment equipped with a
component video output
If you intend to connect video equipment that has component
video output jacks, such as a DVD player or a VCR, follow the
instructions below.
Connect the video equipment using the HD15-
Component video signal cable (supplied).
to the HD15 input
connector
to component video
output of the video
equipment
Note
Use an HDMI cable marked with the HDMI logo.
to the HDMI input
connector
HD15-Component video signal
cable (supplied)

Selecting the input signal

Press the INPUT button.
The input signal changes each time you press this button.
On-screen message
(Appears about 5 seconds on
the upper left corner.)
DVI-D
HD15
HDMI
13
(GB)
Input signal configuration
DVI-D input connector
(digital RGB)
HD15 input connector
(analog RGB)
HDMI input connector