Identifying Parts And Controls - Sony SDM-H246W Operating Instructions Manual

Identifying parts and controls

See the pages in parentheses for further details.
Front of the monitor
6 5 4 3
Rear of the monitor
7
Remove the back cover.
8
9
0
2 1
6
(GB)
A 1 (Power) switch and 1 (power) (pages 10, 22)
This switch turns the monitor on when 1 (power) illuminates.
To turn the monitor off, press this switch again.
B MENU button (page 14)
This button turns the menu screen on and off.
You can also switch on the DDC/CI function by keeping this
button pressed for more than 8 seconds.
C m/M buttons (page 14)
These buttons are used to select the menu items and make
adjustments.
D OK button (pages 14, 17)
This button activates the selected menu item and adjustments
made using the m/M buttons (3).
E
(Picture Mode) button (page 14)
This button is used to adjust the Picture Mode.
F INPUT button (page 13)
This button switches the video input signal among DVI-D,
HD15 and HDMI when multiple computers are connected to
the monitor.
G Back cover (page 8)
Remove this cover when you connect cables or cords.
H HDMI input connector (page 13)
HDMI (High-Definition Multimedia Interface) provides an
uncompressed, all-digital audio/video interface between this
monitor and any HDMI-equipped audio/video equipment.
I AC IN connector (page 9)
This connector connects the power cord (supplied).
J Security lock hole
The security lock hole should be used with the Kensington
Micro Saver Security System.
Micro Saver Security System is a trademark of Kensington.