Table of Contents
Advertisement
Parameter
Value
TIME CC (R)
PRE-DLY CC (R)
E.LEVEL CC (R)
LOW CC (R)
HIGH CC (R)
TIME CC (D)
PRE-DLY CC (D)
E.LEVEL CC (D)
OFF, CC#1–31, 64–95
LOW CC (D)
HIGH CC (D)
EFFECT SW
EFFECT A SW
EFFECT B SW
CTL1 CC
CTL2 CC
EXP CC
Selects the tempo clock input that is used for synchronization.
INTERNAL
EXT (USB)
EXT (MIDI)
SYNC
AUTO
Selects the source of the realtime messages that are transmitted from the MIDI OUT connector or the USB
port.
REALTIME SRC
INT
USB
MIDI
Specifies the connector to which MIDI messages received from the MIDI IN connector and the USB port are
output.
MIDI IN->OUT
OFF
USB
USB IN->OUT
MIDI
U+M
DEVICE ID
1–32
MIDI PC MAP
Parameter
Value
BNK-PC# 1:001–3:128
01A–99C
Explanation
[TIME/VALUE] knob (reverb)
[PRE-DELAY] knob (reverb)
[E. LEVEL] knob (reverb)
[LOW] knob (reverb)
Specifies the controller number of the
[HIGH] knob (reverb)
corresponding knobs or switches.
[TIME/VALUE] knob (delay)
The parameters that can be controlled differ
[PRE-DELAY] knob (delay)
depending on the mode.
[E. LEVEL] knob (delay)
[LOW] knob (delay)
[HIGH] knob (delay)
Specifies the controller
number that switches
between effect-on and
bypass.
External CTL1 switch
External CTL2 switch
External EXP pedal
Synchronizes to the internal tempo.
Synchronizes to the tempo from the USB port.
Synchronizes to the tempo from the MIDI IN connector.
Normally synchronizes to the internal tempo, but if MIDI clock is being input
from the MIDI IN connector or the USB port, the tempo is synchronized to MIDI
clock (AUTO).
If the RV-500 is a slave device, choose the "AUTO" setting.
Internal realtime messages are the source.
Realtime messages from the USB port are the source.
Realtime messages from the MIDI IN connector are the source.
MIDI messages are not output.
MIDI messages are output to the USB port.
MIDI messages are output to the MIDI OUT connector.
MIDI messages are output to the USB port and the MIDI OUT connector.
Sets the MIDI Device ID used for transmitting and receiving System Exclusive
messages.
Explanation
Specifies the program number that corresponds to each patch number.
Parameter List
MEMO
For details on MIDI, refer to "MIDI
Implementation" (PDF).
http://www.boss.info/manuals/
19
Advertisement
Table of Contents
