Table of Contents
Advertisement
Parameter List
CONTROL
You can specify the functions of the [TAP/CTL] switch and of a footswitch or expression pedal
connected to the CTL 1,2/EXP jack.
5 "Using the [TAP/CTL] Switch to Control the Reverb" (p. 8)
5 "Assigning a Function to an External Pedal" (p. 22)
ASSIGN
ASSIGN INPUT SENS
Parameter
ASGN INPUT SENS
ASSIGN 1–8
Parameter
SW
SRC (SOURCE)
MODE (SOURCE MODE)
TRG (TARGET)
MIN (TARGET MIN)
MAX (TARGET MAX)
16
Value
Explanation
0–100
Adjusts the input sensitivity when "INPUT" is selected for SRC.
Value
Explanation
OFF, ON
Turns the ASSIGN 1–8 on/off.
Specifies the controller (source).
TAP/CTL
[TAP/CTL] switch.
EXP PDL
External expression pedal (EV-30, EV-5 etc.; sold separately) connected to the
CTL 1,2/EXP jack.
(EXP PEDAL)
CTL1, 2 PDL
External footswitch connected to the CTL 1,2/EXP jack.
Internal pedal
The virtual expression pedal will begin operating when started
by the specified trigger (TRIGGER), modifying the parameter
INT PDL
specified by "TARGET. "
For details on the parameters that can be assigned to the internal
pedal, refer to "TIME" and "CURVE" (p. 17)
Wave pedal
The virtual expression pedal will cyclically modify the parameter specified by
"TARGET" in a fixed wave form.
WAVE PDL
The assigned target parameter will change according to the input level.
INPUT
(INPUT LEVEL)
* If you want to adjust the input sensitivity, set the SENS (INPUT SENS).
CC#1–31, CC#64–95
Controller number from an external MIDI device
Specifies the operation of the controller.
The value will normally be OFF (minimum value), and will be ON
(maximum value) only while the control is being operated.
MOMENT
* If you want to use the internal pedal or wave pedal, set to "MOMENT. "
The value will toggle between OFF (minimum) and ON (maximum) each time the
TOGGLE
control is operated.
This selects the parameter to be changed.
Specifies the range of change for the parameter. The values will depend on the parameter that's assigned by
"TARGET. "
Advertisement
Table of Contents
