Installation - Rinnai RH-S259-SSV-T Operating And Instruction Manual

Installation: 1st Method (According to the diagram below)
Set the L metal plate on the cooker hood
A
Set the location and screw until locked
B
Hang the hood on the setting screw and lock.
C
Installation: 2nd Method (According to the diagram below)
Remove bottom plate, rectifier panel and oil
A
collector as shown
Fix the hood on the cupboard from the inside
B
C Fix the bottom plate, rectifier panel and oil
collector back
D Finished installation
Installation must be performed by qualified personnel only. The manufacturer declines all responsibility for improper
installation and does not accept responsibility for appliance warranty in the event of damage caused by incorrect

installation.

INSTALLATION
Ducted vs. Recirculating Mode
Ducted Mode:
In ducted mode, cooking fumes are vented
outdoors. In this mode, only aluminum filters are
installed
Recirculation Mode:
Fumes are filtered for grease and odor through the
aluminum grease filters and charcoal filter respectively,
and then reintroduced into the kitchen environment. In
this mode, aluminium grease filter with charcoal pellets
must be installed.
aluminium filters with
charcoal pellets
4