Weather Channel Operation (Available With The Ic-A14 Only); Setting Weather Alert Function; Weather Channel Selection - Icom iC-A14 Instruction Manual

6
OTHER FUNCTIONS
■
Weather channel operation
(Selectable on only the IC-A14)
The IC-A14 has VHF marine WX (weather) channel receiving
capability for fl ight planning.
D Weather channel selection
q Push [FUNC] , then push [WX](7) to select WX channel
mode.
• "WX--" and previously selected channel number appears.
w Push [Y]/[Z] to select the desired WX channel.
e Push [CLR] to exit the WX channel mode and return to
the frequency mode.
Weather channel appears
23
D Setting weather alert function
An NOAA broadcast station transmits a weather alert tone
before any important weather announcements. When the
weather alert function is turned ON, the transceiver detects
the alert, and sounds a beep tone until the transceiver is op-
erated. The previously selected (used) weather channel is
checked any time during standby, or while scanning.
Push [FUNC], then push [WX-ALT](4) to turns the weather
alert function ON or OFF.
• The "WX" icon appears when the weather alert function ON.
The "WX" icon appears when
the weather alert is set to ON
[WX](7)
[FUNC]
[WX-ALT](4)
[FUNC]