Charging - Stihl MSA 120 C Instruction Manual

English
4.8.2 Pull-in
The saw is pulled away from the operator when the bottom
of the bar is used for cutting.
WARNING
￭ If the rotating chain makes contact with a hard object and
is suddenly pinched, the saw is abruptly jerked away from
the operator. The operator can lose control of the saw and
be seriously or fatally injured.
► Hold the saw firmly with both hands.
► Operate the saw as described in this instruction manual.
► Keep the guide bar straight in the cut.
► Apply the spiked bumper properly.
► Always cut with the chain running at full speed.
4.8.3 Pushback
14
The saw is pushed back toward the operator when the top of
the bar is used for cutting.
WARNING
￭ If the rotating chain makes contact with a hard object and
is suddenly pinched, the saw can be abruptly pushed back
toward the operator. The operator can lose control of the
saw and be seriously or fatally injured.
► Hold the saw firmly with both hands.
► Operate the saw as described in this instruction manual.
► Keep the guide bar straight in the cut.
► Always cut with the chain running at full speed.
4.9

Charging

WARNING
Contact with live parts can occur for the following reasons:
– The connecting cord is damaged.
– The mains plug is damaged.
– The socket is not properly installed.
￭ Contact with live parts can result in electric shock. The
user may be seriously injured or killed.
► Make sure that the connecting cord and mains plug are
undamaged.
► Plug the mains plug into a correctly installed socket.
4 Safety Precautions
0458-716-0121-B