Charging The Battery, Leds; Activating And Deactivating Bluetooth® Radio Interface; Assembling The Saw - Stihl MSA 300.0 Instruction Manual

English
For contacts and other information, please visit
https://support.stihl.com or the app.
The STIHL connected feature is available in the
STIHL App in certain markets.
6

Charging the Battery, LEDs

6.1 Charging the Battery
The charging time depends on various factors,
e.g. the battery temperature or the ambient tem‐
perature. The actual charging time may vary
from the charging time indicated. The charging
time is indicated at www.stihl.com/charging-
times.
► Recharge the battery as described in the User
Manual for the STIHL AL 101, 300, 301-4, 500
chargers.
6.2 Displaying the charge level
1
► Press the button (1).
The LEDs light up green for about 5 seconds
and indicate the state of charge.
► If the LED on the right flashes green: Charge
the battery.
6.3 LEDs on Battery
The LEDs can show the state of charge or mal‐
functions. The LEDs can glow or flash green or
red.
The state of charge is indicated when the LEDs
glow or flash green.
► If the LEDs glow or flash red: Troubleshooting,
20.1.
Malfunction in trimmer or battery.
7 Activating and Deactivating
Bluetooth® Radio Interface
7.1
Activating the Bluetooth
Interface
► If the battery is equipped with a Bluetooth
radio interface: press the button and hold it
depressed for about 3 seconds.
46
The "BLUETOOTH
bol
Bluetooth
activated.
7.2
► If the battery is equipped with a Bluetooth
radio interface: press the button and hold it
depressed for about 3 seconds.
The "BLUETOOTH
bol
tooth
vated.
8
8.1
8.1.1
80-100%
60-80%
40-60%
The guide bar and saw chain combinations that
20-40%
can be used with the chain sprocket are listed in
the specifications,
0-20%
► Turn off the chainsaw, engage the chain brake
and remove the battery.
2
► Rotate the nuts (1) counterclockwise until the
chain sprocket cover (2) can be removed.
► Remove the chain sprocket cover (2).
► Turn the tensioning screw (3) counterclock‐
wise until the tensioner slide (4) butts against
the left end of the housing.
Radio
®
®
6 Charging the Battery, LEDs
®
" LED next to the sym‐
lights up blue for about 3 seconds. The
®
radio interface on the battery is
Deactivating the Bluetooth
Radio Interface
®
" LED next to the sym‐
flashes blue for six times. The Blue‐
®
radio interface on the battery is deacti‐

Assembling the Saw

Mounting and Removing the
Bar and Chain
Mounting the Guide Bar and Saw
Chain
22.1.
1
®
®
3
4
0458-009-9801-A