English
– The charger is not hung up by the connecting cord.
– The charger is stored at temperatures between + 5 °C
and + 40 °C.
16 Cleaning
16.1 Cleaning the Saw
► Switch off the chain saw, engage the chain brake and
remove the battery.
► Clean the hedge trimmer with a damp cloth or STIHL resin
solvent.
► Remove the chain sprocket cover.
► Clean the area around the sprocket with a damp cloth or
STIHL resin solvent.
► Remove foreign matter from the battery compartment and
clean the battery compartment with a damp cloth.
► Clean electrical contacts in the battery compartment with
a soft brush.
► Fit the chain sprocket cover.
16.2 Cleaning the Bar and Chain
► Switch off the chain saw, engage the chain brake and
remove the battery.
► Remove the bar and chain.
1
► Clean the oil port (1), oil inlet hole (2) and bar groove (3)
with a soft brush or STIHL resin solvent.
32
► Clean the saw chain with a soft brush or STIHL resin
► Mount the bar and chain.
16.3 Cleaning the Battery
► Clean the battery with a damp cloth.
16.4 Cleaning the Charger
► Disconnect the plug from the wall outlet.
► Clean the charger with a damp cloth.
► Clean the charger's electrical contacts with a soft brush.
17 Maintenance
17.1 Chain Sprocket Maintenance
The chain sprocket cannot be serviced by the user.
► If the chain sprocket is defective or damaged: Do not use
17.2 Deburring the Guide Bar
A burr can build up on the outer edge of the guide bar.
► Remove burr with a flat file or a STIHL guide bar dressing
► If you have any queries: Contact your STIHL servicing
3
17.3 Sharpening the Saw Chain
Correctly sharpening saw chains requires a lot of practice.
STIHL files, STIHL filing aids, STIHL sharpeners and the
brochure "Sharpening STIHL Saw Chains" help you achieve
the right results. To obtain the brochure visit http://
2
3
www.stihl.com/sharpening-brochure.
STIHL recommends you have saw chains resharpened by a
STIHL servicing dealer.
solvent.
your chain saw and contact your STIHL servicing dealer.
tool.
dealer.
16 Cleaning
0458-716-0121-B