System Battery - HP ProLiant XL730f Gen9 User And Maintenance Manual

Install the heatsink.
6.
Install the access panel (on page 13).
7.
Install the server
8.
Connect all peripheral cables to the server.
9.
Power up the server
10.

System battery

If the server no longer automatically displays the correct date and time, you might have to replace the
battery that provides power to the real-time clock. Under normal use, battery life is 5 to 10 years.
WARNING: The computer contains an internal lithium manganese dioxide, a vanadium
pentoxide, or an alkaline battery pack. A risk of fire and burns exists if the battery pack is not
properly handled. To reduce the risk of personal injury:
• Do not attempt to recharge the battery.
• Do not expose the battery to temperatures higher than 70°C (158°F).
• Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.
• Replace only with the spare designated for this product.
IMPORTANT: Replacing the system board battery resets the system ROM to its default
configuration. After replacing the battery, reconfigure the system through RBSU.
To remove the component:
Power down the server (on page 10).
1.
Disconnect all peripheral cables from the server.
2.
Remove the server (on page 11).
3.
Remove the access panel (on page 12).
4.
Locate the battery on the system board
5.
("Installing the server" on page 15).
("Powering up the server" on page 15).
("Server components" on page 7).
Removal and replacement procedures 56