HP ProLiant XL730f Gen9 User And Maintenance Manual page 54

Remove the processor from the processor retaining bracket.
7.
CAUTION: To avoid damage to the processor, do not touch the bottom of the processor,
especially the contact area.
To replace the component:
CAUTION: To avoid damage to the system board, processor socket, and screws, do not
overtighten the heatsink screws.
Install the processor. Verify that the processor is fully seated in the processor retaining bracket by
1.
visually inspecting the processor installation guides on either side of the processor. THE PINS ON
THE SYSTEM BOARD ARE VERY FRAGILE AND EASILY DAMAGED.
Removal and replacement procedures 54