Drive Cage - HP ProLiant XL730f Gen9 User And Maintenance Manual

Cut the tie wraps securing the cables, and then disconnect the cables.
5.
Remove the power supply.
6.
To replace the component, reverse the removal procedure.

Drive cage

IMPORTANT: The drive cage is not compatible with the HPE Infiniband 544 FlexibleLOM
adapter. The adapter will cause physical interference, preventing installation of the drive cage.
To remove the component:
Power down the server (on page 10).
1.
Disconnect all peripheral cables from the server.
2.
Remove the server (on page 11).
3.
Remove the access panel (on page 12).
4.
Removal and replacement procedures 40