Juniper EX9200 Features Manual page 79

Table 7: show services accounting flow-detail Output Fields (continued)
Field Name Field Description
Address where the flow originated.
Source address
Name of the source port.
Source port
Source prefix length.
Source prefix length
Address where the flow is sent
Destination address
Destination prefix length.
Destination prefix
length
Name of the destination port.
Destination port
Actual time when the packet in this aggregation was first seen.
Start time
Actual time when the packet in this aggregation was last seen.
End time
Number of packets in the aggregation.
Packet count
Number of bytes in the aggregation.
Byte count
Time since last Amount of time elapsed since the last active timeout, in the format
active timeout
Number of packets in the aggregation since the last active timeout.
Packet count for
last active timeout
Number of bytes in the aggregation since the last active timeout.
Byte count for last
active timeout
Sample Output
show services accounting flow-detail
Copyright © 2017, Juniper Networks, Inc.
.
In this sample, the output is split into three sections, with ellipses (...) indicating where
the sections are continued.
user@host> show services accounting flow-detail
Service Accounting interface: rsp0, Local interface index: 171
Service name: (default sampling)
Interface state: Accounting
Protocol Input
interface
tcp(6) ge-5/0/1.0
tcp(6) ge-5/0/1.0
Destination Destination
address
198.51.100.149
198.51.100.138
hh
Source
address
192.0.2.2
192.0.2.2
Packet
port count
0 2660
0 2660
Chapter 5: Operational Commands
Output Level
All levels
All levels
extensive
All levels
extensive
All levels
detail extensive
detail extensive
All levels
All levels
: mm : ss . None specified
None specified
None specified
Source Output
port interface...
0 ge-5/0/0.0
0 ge-5/0/0.0
Byte Time since last
count active timeout...
170240 00:00:58
170240 00:00:58
65